Derris Ventures

• PROTON Retractable block works on Centrifugal Force
• Designed to provide maximum movement of a worker in most directions
• In case of fall, an automatic braking system immediately arrests the fall
• Minimum fall-length
• Freedom of movement
• Very safe when used correctly
• High Impact resistance Glassfield casing
• Stainless Steel Wire rope
• Length: 7/12/15/20 meters
• Standard: Conforms to EN 360:2002

Additional Information:

• Production Capacity: 1000

• • One dorsal D-ring, 2 chest attachment D-rings and Two lateral D-rings for Work Positioning
  • Size Adjustment straps on shoulders, chest, waist and thighs
  • Integrated cushioned waist padding for additional comfort
  • Standard: EN 361:2002, EN 358:2018

Additional Information:

• Production Capacity: 1000

SKU: PCGS10

Key Features

• The primary function of an Retractable block is to arrest a fall by quickly activating the braking mechanism when it detects sudden movement or  acceleration. This rapid response helps minimize the potential for injury due to a fall.
• Retractable block are designed to maintain constant tension on the lifeline, helping to minimize slack and reduce the risk of tripping or entanglement during use.
• Also It's important to note that the specific features and capabilities of self-retracting lifelines may vary depending on the model, manufacturer, and intended use. When  electing and using an SRL, it is crucial to follow the manufacturer's instructions, conduct proper training, and adhere to applicable safety standards and regulations.

Certification:

Certified to EN 360:2002 and Atex for use in potentially explosive atmosphere as per Directive 2014/34/EU

• • One dorsal D-ring and Two textile chest attachment loops
  • Ideally positioned sit-strap for extended comfort Built-in dual colour webbing for easy orientation
  • Fray-proof dope-dyed polyester webbing Metal buckles of high-strength alloy steel
  • High-strength polyester stitching
  • Size adjustment straps only at chest and thighs
  • STANDARD :- EN 361 CE Marked
  • IDEAL APPLICATIONS:- Working at Height, Ladder climbing, Fall Arrest.
  • WEBBING MATERIAL:- Polyester
  • WEIGHT :- 910 Grams
  • TEST COMPLIANCE - (Static Strength) :- Tested at each attachment element with a force of 15 KN applied for 3 min.
  • TEST COMPLIANCE - (Dynamic Strength) :-  When tested at each Fall Arrest Attachment element with a torso dummy of 100 Kg mass, the full body harness withstands drop tests with a free fall distance of 4 mtr

Additional Information:

• Packaging Details: 10 pieces per cartoon

• Manually operated, controlled descent device
• Application: Commonly used for suspended work positioning, self-evacuation, rescue operations
• Double stop designed for the anti-panic auto braking system
• Immediate blocks on clutching or releasing the devices
• Works on 10.5 – 11 mm Braided Rope
• Maximum working load: 150 kg
• Standard: Conforms to EN 341 – Class-A

• Webbing type retractable fall arrester
• High Impact resistance polyamide casing
• Webbing rope with swivel snap hook
• Maximum load capacity : 100 kg
• In case a fall occurs, the automatic braking system
• in the block immediately arrests the fall

• Lightweight guided type fall arrester
• Inbuilt gravity lock to avoid incorrect use
• Two deliberate operations required to open and close
• Built-in rope guided wheel for tangle-free movement
• CERTIFIED

• Controlled descent device with an automatic speed regulator – 2 persons
• 10.5mm kernmantle rope lifeline running through an aluminium housing
• Aluminium double action hooks at both ends of the rope
• With friction braking horns on the housing, for manual control if required​
• Nominal Load: 200 Kg
• Minimum Load: 70 Kg
• Proof load EN341: 250 Kg
• Proof Load EN1496: 300 Kg
• Static Proof Load: 20 kN
• 3800 Descent Metres with Nominal Load: 200 Kg
• 11000 Descent Metres with Minimum Load: 70 Kg
• Maximum Descent Height: 200 m
• Maximum Descent Speed: 1.5 m/sec
• Deviation Points on the housing of the device
• Swivel eye anchor attachment point – ø16mm​
• Lifting Nominal Load: 200 Kg
• Lifting Performance: 75 m
• Switchable Reverse Lock
• Tested for 2 persons
• Lowering / Descending Rope KMS 105 to EN 1891:1998/A
• Standard: EN341 and EN1496

• Anchor point: One dorsal D-ring, Two chest attachment textile loop, One ventral loop, Two lateral D-ring
• Special features: Multipurpose harness, ideal for professional use and rescue One external attachment point for rescue & descending Ergonomic Horizontal H-shaped thigh straps
• Facilitate vertical and horizontal movements
• No discomfort or pressure on the groin
• Improved comfort in case of a fall
• Breathable open-core padding for extra comfort at the back and thigh
• Automatic buckle for quick adjustment
• Easy no-tangle donning
• Material: Fray-proof dope-dyed polyester webbing Metal quick buckles of high strength alloy steel
• Stitching: High-strength polyester computer-controlled stitching ensures consistency
• Adjustability: Adjustment straps at shoulder, waist, thighs
• Standard: IS 3521:1999 ISI marked

Additional Information:

• Production Capacity: 1000

• • Lightweight guided type fall arrester
  • Made of stainless steel
  • Inbuilt gravity lock to avoid incorrect use
  • Two deliberate operations required to open and close
  • Built-in rope guided wheel for tangle-free movement
  • With anti-panic feature
  • Standard: Conforms to EN 353-2

Additional Information:

• Production Capacity: 1000

• Heavy duty rope with low elongation & high static strength
• Intended primarily for Work at Height , Confined Space
• Job and Rescue
• Standard: Conforms to EN 1891 to EN 567

• Adjustable shoulder, thigh straps and waist belt
• The straps are provided with a soft padding for best possible comfort
• High dynamic strength and integrity
• Conforming: EN 361: 2002, EN 358:1999 and EN 813:2008

Additional Information:

• Production Capacity: 1000

• Twin webbing tool Lanyard one side carabine
  and other Side loop with tightner
• Light weight elasticated lanyard
• Carabiners made of Alloy steel, conforming to EN362

• Portable Light weight anchorage point designed for the parapet to ensure safe working in suspension position
• Material: Galvanised steel, strong and built to last
• Rubber padding supports the working surface and reduces the possibility of damage
• Adjustability: between 60 mm to 370mm
• Weight: 9 kg approximately
• Maximum breaking strength: 25 kN

• Lightweight web straps designed to reduce the onset of suspension trauma during post-fall suspension, allow user to flex leg muscles and relieve leg strap pressure while suspended prior to rescue
• Avoid effects of suspension trauma
• Compact, lightweight, versatile
• Multiple attachment point options
• Fast, easy installation & deployment
• Multiple loop design accommodates all heights and sizes
• Length- 1.2 meter

Rebar Caps

PVC Caps

• 6mm to 12mm
•  12mm to 24mm
• 24mm to 32mm

Type : Construction parts

Material : Made from plastic injection molding.

Size :H 56mm. Dia, out side 60mm, thickness 1.25mm

Color :   Yellow

Weight :17 gram

Features : It is suitable for bar size 12 to 20 mm. It provide protection from injury to worker. It covers exposed verticle ends a reduce corrosion.