Derris Ventures

Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is specifically developed for protection against toxic, corrosive gases, liquids and solid chemicals. This high-performance chemical barrier fabric is suited for industrial, HazMat, and domestic preparedness applications.

• Certified to NFPA 1990 (NFPA 1994, Class 2) 2022 edition
• Class 2 garments are designed for situations where there is an immediate danger to life and health (IDLH) and must be worn with a self-contained breathing apparatus (SCBA).
• Encapsulated Level A garment design is our highest level of protection from liquid splash and vapor/gas exposures for both the wearer and respiratory equipment
• Double taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered, both inside and outside of garment with compatible chemical-resistant material by heat-sealing.
• Expanded anti-fog faceshield provides wide 220 degree viewing angle. EX faceshield is three-layer laminate composed of 40 mil PVC/5 mil Teflon™ / 20 mil PVC
• Front entry design allows wearer to partially don garment (maintain standby position) without assistance
• Expanded back to accommodate self-contained air breathing apparatus (SCBA)
• Vapor tight zipper. Extra long to increase garment opening and aid donning and doffing
• Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper
• Attached internal gloves composed of five layer laminate film for a broad range of chemical protection
• Neoprene gloves provide mechanical and physical durability to help protect inner gloves
• Integrated socks composed of garment material
• Attached flaps are designed to cover boot tops to help reduce potential for liquid intrusion
• Two exhaust valves release higher pressure inside encapsulating garments while simultaneously helping to prevent inward leakage of external vapors or particles into the garment. One-way valves are positive pressure and open on demand. Valves include splash covers made of barrier material to help prevent liquid intrusion. Valves are located on left back of head and right lower back. (146)
• Internal adjustable waist belt system for support and improved fit
• Each suit has a unique serial number and is fully tested at time of manufacture including positive air pressure integrity testing per ASTM F1052.
• Pass-thrus are optional and can be installed upon request when ordering. Some suits are available with optional pass-thrus to accommodate the following SCBA manufacturers: Scott, Interspiro, MSA, Draeger, Survivair®. Please call Customer Service 1-800-931-3456 for additional information. (3377)
• Made in the USA, North American Free Trade Agreement (NAFTA) compliant and Trade Agreement Act (TAA) compliant

Additional Information:

• Production Capacity: 10
• Delivery Time: 45 days
• Packaging Details: Box

Tychem® 6000 garments are made of a proprietary barrier film laminated to a Tyvek® substrate. The fabric provides at least 30 minutes of protection against over 180 challenge chemicals including chemical warfare agents and toxic industrial chemicals. Tychem® 6000 garments are strong, durable and lightweight, and they are available in both high-visibility orange and low-visibility gray fabrics, making them a preferred choice for law enforcement, emergency medical services (EMS) technicians and military personnel.

• Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing.
• Three-piece hood design with longer zipper that extends to chin for complete coverage of neck area and good fit around a respirator
• Storm flap covers zipper which can be sealed by the wearer with adhesive strip to prevent intrusion at zipper
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Meets the U.S. industry requirements for blood (ASTM F1670) and viral penetration (ASTM F1671) protecting against several bloodborne pathogen exposure risks.

Additional Information:

• Production Capacity: 1000
• Packaging Details: Box

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.

A lightweight, and durable fabric, Tychem® 2000 fabric provides at least 30 minutes of protection against >40 chemical challenges. Tychem® 2000 is used for light splash protection in a variety of industrial environments, including petroleum refining, pulp and paper manufacturing, food processing, chemical processing, and pharmaceutical manufacturing.

• Multiple interlocking threads are sewn around the raw edges of garment material to create a strong, stress-resistant seam
• Attached hood with elastic around face opening.
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.

Additional Information:

• Production Capacity: 100
• Packaging Details: Box of 10